[cisco-voip] clock slip

[Jared Mauch]

On Wed, Oct 27, 2004 at 08:43:17AM -0700, Voll, Scott wrote:
> How do I check for Clock Slip on a PRI?
> 
> TIA
> 
> Scott

	"sh contr t1 "

	you'll see an output that looks like this.. note the "Slip Secs"

	- jared

T1 2/2 is down.
  Applique type is Channelized T1
  Cablelength is long gain36 0db
  Transmitter is sending remote alarm.
  Receiver has loss of signal.
  alarm-trigger is not set
  Framing is ESF, Line Code is B8ZS, Clock Source is Line.
  Data in current interval (270 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 270 Unavail Secs
  Total Data (last 48 15 minute intervals):
     0 Line Code Violations, 0 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 43200 Unavail Secs



-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.