[cisco-voip] 1760 Voice Gateway E&M MGCP Caller ID

[Walenta, Phil]

I've set this up before.  Instead of type "e&M-wink-start", see if there is a "e&m-fgd" setting.  I don't know that it will be present on a 17XX device.

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Carter, Bill
Sent: Thu 9/2/2004 12:39 PM
To: Wes Sisk
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 1760 Voice Gateway E&M MGCP Caller ID



I have configured h323.  How do I enable this.  I have a T-1 E&M Wink and Telco is sending Feature Group D for Caller ID.

 

Here is a configuration snip...

 

 

controller T1 0/0

 framing esf

 linecode b8zs

 ds0-group 1 timeslots 1-24 type e&m-wink-start dtmf dnis  (do I want dtmf dnis??)

 

dial-peer voice 100 voip

 destination-pattern 6...

 voice-class codec 1

 voice-class h323 1

 session target ipv4:192.168.254.5

 dtmf-relay h245-alphanumeric

 fax-relay ecm disable

 fax rate 14400

 no vad

!

dial-peer voice 200 pots

 destination-pattern T

 progress_ind alert enable 8

 progress_ind progress enable 8

 progress_ind connect enable 8

 direct-inward-dial

 port 0/0:1

 

 

I am also having trouble with inbound DID calls.  From the Telco this is what I am getting:

Called Number=*2175551212*1212*

 

Thanks, 
Bill Carter 
Senior Business Communications Analyst
Sentinel Technologies, Inc. <http://www.sentinel.com/>  
bcarter at -nospam-sentinel.com <mailto:bcarter at sentinel.com>  
217.391.5015 (W) 
800.860.8102 (P) 
217.698.9222 (F) 

________________________________

Cisco Systems 2003 Global IP Communications Partner of the Year <http://newsroom.cisco.com/dlls/partners/news/2004/pr_prod_02-11.html>  

 

-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Wednesday, September 01, 2004 5:12 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 1760 Voice Gateway E&M MGCP Caller ID

 

AFAIK
the routers will support receiving clid via feature group d (fgd) in the form *ani*dnis*
this is only supported in h323.
CM current cannot receive ANI via MGCP.

/Wes

Carter, Bill wrote: 

How can I get inbound caller ID working on an T-1 E&M circuit to a 1760 and CallManager.  Does MGCP not support Caller ID in this configuration?  Will H.323 allow me to do Caller ID ?

 

 



________________________________



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip