[cisco-voip] AS5300 : problem with a softphone

[Klaus Darilion]

xten uses "loose-routing" (RFC3261) whereas the ip-phone uses 
"strict-routing". You have to have a loose_route(); block in your 
ser.cfg to proper route the messages from strict routers.

klaus

Nicolas RUIZ wrote:
> HI,
> 
> I progress in my problem, I see the error, I think my IP-phone work in
> StateFull proxy and the soft phone work in StateLess Proxy.
> 
> I explain:
> 
> That's the debug of the ip-phone and the softphone on my proxy-registrar SIP
> iptel open source project.
> 
> When the ip-phone reply the ACK to the proxy, he put the IP of the proxy and
> when the soft phone reply the ACK, he put the IP of the GATEWAY CISCO!!!!
> WHY????
> 
> Thanks for your help
> 
> Nicolas RUIZ
> 
> -----Message d'origine-----
> De : Anthony Baxter [mailto:anthony at interlink.com.au] 
> Envoyé : jeudi 2 septembre 2004 13:29
> À : Nicolas RUIZ
> Objet : Re: [cisco-voip] AS5300 : problem with a softphone
> 
> Look at the debugging on the XTen softphone, find out why it didn't like
> the cisco's response. At the very least, you need to get _both_ sides of
> the SIP, not just the cisco's side.
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip