[cisco-voip] # of rings on callmanager

[Lelio Fulgenzi]

Cluster Wide Parameters (Feature - Forward)

Forward NoAnswer Timer (sec)* 

This parameter specifies seconds to wait before forwarding no-answer condition is satisfied. 
This is a required field.
Default: 12.
Unit: sec.
Minimum: 1.
Maximum: 300.

Please note that this is in seconds, not rings. You'll notice that the called party will hear a different number of total rings than the calling party. The cadence is different for ringback to the calling party then it is on the phone of the called party. We use 15 seconds, which gives us 4 rings on IP phone, and 3 rings to the calling party.
  ----- Original Message ----- 
  From: Chad Whitten 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, September 09, 2004 10:45 AM
  Subject: [cisco-voip] # of rings on callmanager


  I know there is a setting somewhere that can change the amount of time a phone 
  rings (all phones) but cant for the life of me find it.  im running 
  callmanager 3.2
  -- 
  Chad Whitten
  Network Administrator
  neXband Communications
  cwhitten at nexband.com
  601-944-4801 Phone
  601-944-4803 Fax

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040909/f94f2f72/attachment.html