[cisco-voip] Problem call VoIP to ISDN phone, VG200 Restart/reboot

[ET02Burri Laurent]

Hello,

 

I'm student.

 

I have a VG200 with IOS 12.1 Xm7

 

When I call a Voip phone (7960) to RNIS Intra phone -> OK

When I call a Analog phone on the PSTN -> OK

 

When a Analog phone on th PSTN call Voip phone -> OK

When a RNIS phone on the PSTN call Voip Phone -> OK

 

When a Voip phone call a RNIS phone to the PSTN -> Reboot !!!!!!!

 

;--------------------------------------------------------------- panne
------------------------------------------------------------------------
------------

00:16:19: ISDN BR1/0: TX ->  SABMEp c/r = 0 sapi = 0  tei = 64

00:16:19: ISDN BR1/0: RX <-  UAf c/r = 0  sapi = 0  tei = 64

00:16:19: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 64 changed
to up

00:16:19: ISDN BR1/0: TX ->  INFOc sapi = 0  tei = 64  ns = 0  nr = 0  i
= 0x0801010504038090A31801836C06008033303033700C803030333237323939313335

00:16:19:     SETUP pd = 8  callref = 0x01

00:16:19:         Bearer Capability i = 0x8090A3

00:16:19:         Channel ID i = 0x83

00:16:19:         Calling Party Number i = 0x0080, '3003', Plan:Unknown,
Type:Unknown

00:16:19:         Called Party Number i = 0x80, '00327299135',
Plan:Unknown, Type:Unknown

00:16:19: ISDN BR1/0: RX <-  RRr sapi = 0  tei = 64  nr = 1

00:16:19: ISDN BR1/0: RX <-  INFOc sapi = 0  tei = 64  ns = 0  nr = 1  i
= 0x0801810D1801891E028188

00:16:19:     SETUP_ACK pd = 8  callref = 0x81

00:16:19:         Channel ID i = 0x89

00:16:19:         Progress Ind i = 0x8188 - In-band info or appropriate
now available 

00:16:19: ISDN BR1/0: TX ->  RRr sapi = 0  tei = 64  nr = 1

00:16:19: ISDN BR1/0: RX <-  UI sapi = 0  tei = 127 i =
0x4500029170028001

00:16:20: ISDN BR1/0: RX <-  UI sapi = 0  tei = 127 i =
0x450003C66C058033303033

00:16:20: ISDN BR1/0: RX <-  INFOc sapi = 0  tei = 64  ns = 1  nr = 1  i
= 0x08018102

00:16:20:     CALL_PROC pd = 8  callref = 0x81

00:16:20: ISDN BR1/0: TX ->  RRr sapi = 0  tei = 64  nr = 2

*** System received a SegV exception ***

signal= 0xb, code= 0x1200, context= 0x80dc7d48

PC = 0x804a8394, Vector = 0x1200, SP = 0x81103b30

System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

VG200 platform with 65536 Kbytes of main memory

 

 

program load complete, entry point: 0x80008000, size: 0x507040

 

 
;-----------------------------------------------------------------------
------------------------------------------------------------------------
-----------------------

Sh runn

 

no service single-slot-reload-enable

no service pad

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname gw_ISDN

!

logging rate-limit console 10 except errors

enable secret 5 $1$EkGd$qZEqEoCFw63SjCFuOR9N1.

enable password password

!

username mjs privilege 15 password 0 cisco

ip subnet-zero

no ip finger

!

no mgcp timer receive-rtcp

call rsvp-sync

isdn switch-type basic-net3

!

!

!

!

!

!

interface FastEthernet0/0

 ip address 157.26.173.10 255.255.255.240

 ip broadcast-address 157.26.173.15

 no ip mroute-cache

 speed auto

 half-duplex

!

interface BRI1/0

 no ip address

 no ip mroute-cache

 isdn switch-type basic-net3

 isdn incoming-voice voice

 isdn skipsend-idverify

!

interface BRI1/1

 no ip address

 no ip mroute-cache

 isdn switch-type basic-net3

 isdn incoming-voice voice

 isdn skipsend-idverify

!

ip classless

ip http server

!

!

voice-port 1/0/0

 compand-type a-law

 cptone CH

 timeouts interdigit 2

 bearer-cap Speech

!

voice-port 1/0/1

 compand-type a-law

 cptone CH

 timeouts interdigit 2

!

dial-peer voice 1 pots

 destination-pattern 1

 progress_ind progress enable 8

 direct-inward-dial

 port 1/0/0

!

dial-peer voice 2 voip

 destination-pattern 3

 session target ipv4:157.26.173.9

 codec g711alaw

!

!

line con 0

 transport input none

line aux 0

line vty 0 4

 password vtycisco

 login

!   

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040914/ea03d5a9/attachment-0001.html