[cisco-voip] ISDN Help

[Babidii]

Hi,

I made the following debug:

debug isdn q931
and i got the following error.

Sep 14 11:01:34.201: ISDN Dc3/2 SC Q931: RX <- SETUP pd = 8
 callref = 0x41A8
        Bearer Capability i = 0x9090A2
                Standard = CCITT
                Transer Capability = 3.1kHz Audio
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xE980839E
                Exclusive, Interface 0, Channel 30
        Progress Ind i = 0x8181 - Call not end-to-end ISDN,
may have in-band info
        Calling Party Number i = 0x21A3, '918330146800'
                Plan:ISDN, Type:National
        Called Party Number i = 0xA1, '0129314993723'
                Plan:ISDN, Type:National
Sep 14 11:01:34.201: ISDN Dc3/2 SC **ERROR**:
accept_incoming_csm_call: modem problem Requeste
d circuit/channel not available(0x2C): b channel 29, call
id 0x23
Sep 14 11:01:34.205: ISDN Dc3/2 SC Q931: TX -> CALL_PROC pd
= 8  callref = 0xC1A8
        Channel ID i = 0xE180839E
                Preferred, Interface 0, Channel 30
Sep 14 11:01:34.205: ISDN Dc3/2 SC Q931: TX -> DISCONNECT
pd = 8  callref = 0xC1A8
        Cause i = 0x80AC - Requested circuit/channel not
available
Sep 14 11:01:34.297: ISDN Dc3/2 SC Q931: RX <- RELEASE pd =
8  callref = 0x41A8
Sep 14 11:01:34.301: ISDN Dc3/2 SC Q931: TX -> RELEASE_COMP
pd = 8  callref = 0xC1A8
Sep 14 11:01:44.229: ISDN Dc3/2 SC Q931: RX <- GROUP
SERVICE pd = 67  callref = 0x0000
        Interface Service i = 0x00FFFEFFFE
Sep 14 11:01:44.229: ISDN Dc3/2 SC Q931: TX -> GROUP
SERVICE ACK pd = 67  callref = 0x8000
        Interface Service i = 0x00FFFEFFFE

Have someone every faced this issue?

regards


	
	
		
_______________________________________________________
Yahoo! Messenger 6.0 - jogos, emoticons sonoros e muita diversão. Instale agora!
http://br.download.yahoo.com/messenger/