[cisco-voip] Testing with analog phone into 6608-T1 service

[Walenta, Phil]

With an Atlas 500 series box, you can get a T1 port to go into the 6608, and also 4 or 8 port modules for FXS and FXO.  Dial plan setup is very easy.

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Lelio Fulgenzi
Sent: Sun 9/19/2004 10:48 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Testing with analog phone into 6608-T1 service


I'd like to be able to test dialing into a 6608 with a regular analog phone. I know that Adtran makes plenty of testing/simulation devices, but I'm wondering if they make something to do this and if anyone out there has done this with an Adtran box or something else. If it is possible, is it easy or hard - do I just pick up a phone, dial and it sends it out the T1 port?
 
 
-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     remove the 1st letter of the canadian alphabet from my email, eh!