[cisco-voip] CCM and Syslog

[Jim Popovitch]

This is never easy explaining in an email... ;)  but here are the steps:

  Login to http://<CCM_IP_ADDRESS>/CCMService/alarmconfig.asp
  Select a CCM in left pane/frame
  Select any service in center pane/frame
  Click "Apply to All Nodes" (updates every CCM in lefthand pane)
  Under "Syslog Trace", click "Enable Alarm", 
      select "Informational", add IP address.
  Click "Update" Button
  
  <repeat above steps for each additional service>


An alternate method of getting to the Alarm Configuration site is to
login to CCMAdmin and select Application -> Cisco CM Serviceability from
the top menu.  Then on the new page selct Alarm -> Configuration.

hth,

-Jim P.

On Fri, 2004-09-24 at 04:56, Jens Faulhaber wrote:
> Hi all,
> 
> does anyone have experience with CCM and Syslog? How can I bring CCM
> to send syslog messages? And what kind of messages are send to the
> syslog deamon?
> 
> Thanks for your help
> 
> Cheers Jens
> 
>  
> 
> 
> 
> ______________________________________________________________________
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip