[cisco-voip] Changing setting on 7940

[Voll, Scott]

Perfect.... Thanks

 

________________________________

From: Tim Medley [mailto:medley at mac.com] 
Sent: Friday, September 24, 2004 10:41 AM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Changing setting on 7940

 

Go to the 7940...

 

Press the settings button

Press **# to unlock the Phone

Press 3 for Network settings

Press 32 for Alternate TFTP

Set Alternate TFTP to Yes

Press 8 for TFTP Server

Select edit and enter the tftp server address

Select Validate

Select Save

Select Exit

 

tm

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, September 24, 2004 1:32 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Changing setting on 7940

 

Is there any way to change the settings on my 7940 phone?  I'm currently
using CM 3.3.4 and it gets it's info via DHCP.  I'm bringing up a new
cluster and would like to leave it on the same Vlan and just change the
TFTP address.  I tried manually but it says the key is not active here.
I did unlock it with the **# with no luck.  Any other idea's other then
coming up with a new VLAN and DHCP scope?

 

Thanks

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040924/93b41a92/attachment.html