[cisco-voip] Channelized T3 - Break out Voice PRI

Court Schuett cschuett at hprlogistics.com
Wed Apr 6 12:12:59 EDT 2005


So it should be a CT3 card and a chanelized T3 instead of clear channel?



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Woodcock
Sent: Wednesday, April 06, 2005 10:54 AM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Channelized T3 - Break out Voice PRI

    > I have a customer who is ordering a Channelized T-3.  We will use
a 7206
    > with a PA-MC-T3 Channelized card.  Within the DS-3 they want 4
voice
    > T-1s/PRI pulled into their PBX.  Can put a T-1 voice card in the
Router
    > and route the voice circuits to the PBX?

Nope, for that you need a CT3, rather than an MCT3.  And note that four 
channels is exactly how many you can add/drop, it doesn't support more 
than that.  But it does work just fine, and CT3 cards are dirt cheap.

                                -Bill

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list