[cisco-voip] CCM 4.1(3) Ringtones

[Sean Eckton]

If all you have are the two built-in ones (I believe they are the pulse ones), then try restarting your TFTP server just in case.  Also, look at the ringlist file (ringlist.xml) on the TFTP server.  If the file is invalid you'll get what you're talking about.
 
Sean Eckton
Network Administrator
Information Systems Department
Horizon Bank Cornwall Office
 
Office:  (360) 756-2534
Cisco IP Phone:  (360) 722-7570 (7570 for internal Cisco phone users)
 
sean.eckton at horizonbank.com
 
________________________________
 
Notice:  The information contained in this e-mail is legally privileged and confidential information for the sole use of the recipient.  Any use, distribution, transmittal or re-transmittal of information contained in this e-mail by persons who are not intended recipients may be a violation of law and is strictly prohibited.  If you are not the intended recipient, please contact the sender and delete all copies.
 


>>> Ahmad Cheikh-Moussa <acm at netuse.de> 4/9/2005 12:28:39 PM >>>

Hi!

I have updated my callmanager from 3.3(4)Sr2 to 
4.1(2)Sr1. During the update there was no errors.
Now the Phones lost their ringtones.
Before the update the Phones have the availabiltiy
to choose more than 15 ringtones. Now they only have
two or three.

Is there a xml file I have to correct ?
Did anyone had the same problem after the update ?
Where can I look, which ringtones are available ?


Regards,
Ahmad

-- 
Ahmad Cheikh-Moussa 
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050410/9e75743c/attachment-0001.html