[cisco-voip] CMM ACT

Tue Apr 12 19:19:27 EDT 2005

Thanks Lelio-

That was going to be my next question. Where do you set the max number.

Thanks again

Scott

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, April 12, 2005 4:11 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CMM ACT

Something to note is that conference calls (not sure about codecs)
cannot span resources/dsps. So, as a TAC engineer explained it to me, if
you set the max participants to say 8, then before CallManager places a
call on a conference resource, it will check to see that it can handle
at least 8 participants, if not, it will use the next resource DSP
available. This means, the higher the number of participants, the
greater the chance your DSP will be underutilized. The max number of
adhoc participants is a CallManager Service Parameter.

-----
-----
Lelio Fulgenzi, B.A.
lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120
x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^
mob lawyer: your people insulted my brother.
dr. house: what? romano in the parmesan cheese shaker again?

	----- Original Message ----- 

	From: Voll, Scott <mailto:Scott.Voll at wesd.org>  

	To: cisco-voip at puck.nether.net 

	Sent: Tuesday, April 12, 2005 6:17 PM

	Subject: RE: [cisco-voip] CMM ACT

	Thanks Lelio,

	I think I understand that the ACT card has 4 DSPs Each with 32
channels.

	Which would mean with my current setup I have 64 Conference call
connections and 32 xcoded calls (each xcode call has two legs).

	So with the Conferencing I could have 8 conferences with 8
people each.

	Scott

________________________________

	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
	Sent: Tuesday, April 12, 2005 1:53 PM
	To: cisco-voip at puck.nether.net
	Subject: Re: [cisco-voip] CMM ACT

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administra
tion_guide_chapter09186a00803edac1.html

	This should give you want you need.

		----- Original Message ----- 

		From: Voll, Scott <mailto:Scott.Voll at wesd.org>  

		To: cisco-voip at puck.nether.net 

		Sent: Tuesday, April 12, 2005 4:50 PM

		Subject: [cisco-voip] CMM ACT

		OK, I'm finally getting this transcoding thing. :-)

		Had the hardware setup, but didn't realize I needed an
additional region to make it work:

		Region A - IPCCX 

		Region B - xcode 

		Region C - Remote site phones

		A to B - G711

		B to C - G729

		A to C - G729

		This way the remote site connects to the xcode and the
xcode to the cti port of the IPCCX.  Which is interesting that the xcode
is freed soon as the agent connects.

		With all that said, I have a CMM blade with the ACT
card.  

		How many DSP's are on a single ACT card?  

		How many xcodes per dsp?  

		How many conference calls per DSP?  

		Below is my working config.  

		mediacard 1

		 resource-pool Ad-Hoc dsps 2

		 resource-pool transcodeMcMinnville dsps 2

		!

		!

		sccp local GigabitEthernet1/0

		sccp ccm x.x.102.35 identifier 2

		sccp ccm x.x.102.36 identifier 1

		sccp

		!

		sccp ccm group 1

		 associate ccm 2 priority 2

		 associate ccm 1 priority 1

		 associate profile 2 register MTP001192b75643

		 associate profile 1 register CFB001192b75643

		!

		dspfarm

		!

		dspfarm profile 1 conference adhoc

		 codec g711ulaw packetization-period 30

		 codec g711alaw packetization-period 30

		 codec g729r8 packetization-period 30

		 codec g729ar8 packetization-period 30

		 codec g723r63 packetization-period 30

		 codec g723r53 packetization-period 30

		 associate resource-pool Ad-Hoc

		!

		dspfarm profile 2 transcode

		 codec g711ulaw packetization-period 30

		 codec g711alaw packetization-period 30

		 codec g729r8 packetization-period 30

		 codec g729ar8 packetization-period 30

		 codec g723r63 packetization-period 30

		 codec g723r53 packetization-period 30

		 associate resource-pool transcodeMcMinnville

		How many conference calls with how many connections can
I have all at once?

		How many transcoded calls can I have with it currently?

		Can I make more conference calls and transcode calls
with this single ACT card?

		Anything diffenent I should be doing?

		TIA

		Scott

________________________________

		_______________________________________________
		cisco-voip mailing list
		cisco-voip at puck.nether.net
		https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________

	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050412/8cb507fc/attachment-0001.html