[cisco-voip] External Call with authorization code

Wes Sisk wsisk at cisco.com
Fri Apr 15 13:57:23 EDT 2005


It's not currently possible to set CFA to a route pattern that uses FAC/CMC.
You would have to forward to a pattern that does not enforce fac/cmc.

/Wes
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Lelio Fulgenzi
Sent: Friday, April 15, 2005 12:59 PM
To: Alan Su; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] External Call with authorization code


as far as I know, there is no way to add a pause to a speeddial/callforward
destination.
  ----- Original Message -----
  From: Alan Su
  To: cisco-voip at puck.nether.net
  Sent: Friday, April 15, 2005 12:56 PM
  Subject: [cisco-voip] External Call with authorization code


  Dear All,

  In my CM, I need to dial the authorization code before making the
  external calls, the pattern is: "#*1234567 + 9 + phone number". But I
  need to wait for the dial tone before dialing the phone number. If I
  want to forward calls to external number, what pattern should I use?

  Thanks.


  Regards/Alan

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050415/f644ab05/attachment.html


More information about the cisco-voip mailing list