[cisco-voip] h323 gateway with 2811 without gatekeeper?

[Steven E. Ames]

I'm never encountered the 'More_digits_needed' result. Interesting. Try putting 'no digit-strip' in the dial-peer and see if it makes a difference. If not then I hope someone else has an idea :(

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of riki
> Sent: Monday, April 18, 2005 12:35 PM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] h323 gateway with 2811 without gatekeeper?
> 
> 
> Hello Steven,
> 
> thanks for response
> 
> i used simillar setup but it ends like this:
> 
> Apr 18 19:27:07 voip 1345:    Dial String=00123456789101, Expanded 
> String=00123456789101, Calling Number=
> Apr 18 19:27:07 voip 1346:    Timeout=FALSE, Is Incoming=FALSE, Peer 
> InfoType=DIALPEER_INFO_SPEECH
> Apr 18 19:27:07 voip 1347: Apr 18 18:27:06.504 MET: 
> //-1/0220C45E0BC8/DPM/MatchNextPeer:
> Apr 18 19:27:07 voip 1348:    Result=MORE_DIGITS_NEEDED(1); Outgoing 
> Dial-peer=2101
> Apr 18 19:27:07 voip 1349: Apr 18 18:27:06.504 MET: 
> //-1/0220C45E0BC8/DPM/dpMatchCore:
> Apr 18 19:27:07 voip 1350:    Result=1
> Apr 18 19:27:07 voip 1351: Apr 18 18:27:06.504 MET: 
> //-1/0220C45E0BC8/DPM/dpMatchPeersCore:
> Apr 18 19:27:07 voip 1352:    Result=Partial Matches(1) after 
> DP_MATCH_DEST
> Apr 18 19:27:07 voip 1353: Apr 18 18:27:06.504 MET: 
> //-1/0220C45E0BC8/DPM/dpMatchPeersMoreArg:
> Apr 18 19:27:07 voip 1354:    Result=MORE_DIGITS_NEEDED(1)
> 
> relevant configuration:
> 
> controller E1 0/0/0
>   pri-group timeslots 1-31
> 
> interface Serial0/0/0:15
>   no ip address
>   isdn switch-type primary-net5
>   isdn incoming-voice voice
>   no cdp enable
> 
> voice-card 0
>   no dspfarm
> 
> have you any idea what can cause the problem?
> 
> r.
> 
> Steven E. Ames wrote:
> > That should be very doable. I think you can do it with one 
> dial-peer even:
> > 
> > dial-peer voice 2101 pots
> >  description Incoming VoIP calls
> >  huntstop
> >  preference 1
> >  application session
> >  destination-pattern T
> >  direct-inward-dial
> >   port 1/0:23
> > !
> > 
> > And it should just work. (This is T1 config but it does work).
> > 
> > -Steve
> > 
> > 
> >>-----Original Message-----
> >>From: cisco-voip-bounces at puck.nether.net
> >>[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of riki
> >>Sent: Monday, April 18, 2005 12:03 PM
> >>To: cisco-voip at puck.nether.net
> >>Subject: [cisco-voip] h323 gateway with 2811 without gatekeeper?
> >>
> >>
> >>Hello,
> >>
> >>i have cisco 2811 with 2800 Software 
> >>(C2800NM-SPSERVICESK9-M), Version 
> >>12.3(8)T6, RELEASE SOFTWARE (fc2) with VWIC-1MFT-E1 and 2x PVDM16
> >>
> >>I want to accept incoming h323 call and translate it into 
> >>outgoing call 
> >>on one of 31 channels on E1 interface
> >>
> >>Is it possible to do this without gatekeeper, because i found only 
> >>setups with gk. If yes, can you provide me some links on this topic?
> >>
> >>Thanks for a response
> >>
> >>r.
> >>_______________________________________________
> >>cisco-voip mailing list
> >>cisco-voip at puck.nether.net
> >>https://puck.nether.net/mailman/listinfo/cisco-voip
> >>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>