[cisco-voip] possible VWIC-1MFT-T1 failure

Voll, Scott Scott.Voll at wesd.org
Wed Apr 20 11:13:59 EDT 2005


I'm using a CMM blade in my 6509 with 3 PRI's going out to the PSTN.  I
just recently upgraded to the 12.3(14)T version.  When did you start
seeing the problem?  I believe mine started with the CM upgrade not the
VGW upgrade.

 

Scott

 

________________________________

From: Scott Ingram [mailto:SIngram at clayton.com] 
Sent: Wednesday, April 20, 2005 8:06 AM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] possible VWIC-1MFT-T1 failure

 

Scott,

I have the same configuration i.e. CM is 4.13 and the 7940/60's are on
app load P00307010200. The call gateway in question is a 3640 running
IOS c3640-is-mz.123-8.T.bin.  This static is constant and is so bad I
had to re-route all local call's out the FXO's and LD long haul through
my local PRI.

 

________________________________

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Wednesday, April 20, 2005 11:01 AM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] possible VWIC-1MFT-T1 failure

 

What code are you running on CM and what firmware on the phones.

 

I'm running CM 4.1.3 and P00307010200 on my 7940/60's.  I have started
to hear little amounts of static also (but I don't think I can reproduce
it).  I'm wondering if it's the phone load.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Wednesday, April 20, 2005 5:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] possible VWIC-1MFT-T1 failure

 

When I make outbound local/long distance call's out the PRI I receive a
very loud static on the phone.  When I call into that phone from the
outside in ( 7 digit dial) the phone call is clear.

 

Scott Ingram

Manager of Network operations and Design

Clayton Services, Inc

T: 203-926-8148

F: 203-926-5751

singram at clayton.com

 

 

 

IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential and exempt from disclosure under applicable law.  If you
have received this message in error, you are hereby notified that we do
not consent to any reading, dissemination, distribution or copying of
this message.  If you have received this communication in error, please
notify the sender immediately  and destroy the transmitted information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050420/e3dfbd0d/attachment.html


More information about the cisco-voip mailing list