[cisco-voip] CCME design questions.

[Andriy A. Yerofyeyev]

Hi !	
	We have 1 main location and 2 smaller , interconnected through public 
internet (Ethernet interface). Main location have approximately 25-30 
phones and the others on 5-10 phones. Main location connected to POTS by 
T1 PRI line and one location have several (2-6) regular analog POTS lines.

	 So , our idea is to  concentrate call processing in one place and 
install CCME & Unity in main location on 2650. Phones - basically 
7960.On other locations we planned to install 17xx as access routers.

	As I writed before , locations interconnected through public internet , 
so all of gateways participate in basic access features , such as NAT , 
rate-limit , etc.

	Can CCME , installed in main location ,control call processing in other 
locations or we need to install CCME in each office ?

	Where is lacks in this scheme ?  All of your advices will be very 
appreciated.


-- 

Best regards,

Andriy A. Yerofyeyev