[cisco-voip] Conference to external number

[Ryan Ratliff]

It's based off of the Media Resource Group List you have configured on 
the phones.  Note that unless you have a hardware conference bridge 
defined then if you remote the software cfb you won't be able to 
conference.    You cannot explicitly define which CFB to use for MeetMe 
and Ad Hoc conferences.

-Ryan
On Apr 25, 2005, at 2:22 PM, Alan Su wrote:

Dear Ryan,

I did configure a software conference bridge, but that's for meet-me
conference. How do I choice not to use this s/w conf bridge for the
other conference purpose ?

Thanks.

Regards/Alan

2005/4/25, Ryan Ratliff <rratliff at cisco.com>:
> You're probably using a software conference bridge and trying to
> conference in a g.729 party.  The software cfb only supports g.711.
>
> -Ryan
> On Apr 25, 2005, at 6:47 AM, Alan Su wrote:
>
> Dear All,
>
> When I use IP phone or SoftPhone to make confernce call to other IP
> phone / SoftPhone, it works just fine. But when I try to conference to
> the external number, I will lost the first connected call. Does anyone
> know the reason ? Thanks a lot ~
>
> Regards/Alan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>