[cisco-voip] Can you use the same instructions

[Lelio Fulgenzi]

I believe the drive replacement activity is hardware/RAID controller based rather than application based. Our drive replacement activities are the same on our HP servers (Callmanager) as they are on our IBM servers (Unity). 
  a.. shut down server
  b.. unplug drive
  c.. start up server
  d.. press the appropriate key to 'fail' the drive, but not change the configuration (HP=F2, IBM=F5)
  e.. after server has booted up, insert spare drive
  f.. confirm drive has been mirrored using appropriate utility

-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
mob lawyer: your people insulted my brother.
dr. house: what? romano in the parmesan cheese shaker again?
  ----- Original Message ----- 
  From: Voll, Scott 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, August 02, 2005 6:38 PM
  Subject: [cisco-voip] Can you use the same instructions


  Can I use the same instructions to remove a drive and replace on my
  Unity 7835 as I do on my CM 7835?

  TIA

  Scott


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050802/44175393/attachment-0001.html