[cisco-voip] Question about PSTN ringback

[Wes Sisk]

depends on your ambition and the network devices involved.   Usually you can
strip progress indicator or set it to 1 to prevent audio cut through.  Then
only have to worry about gratuitous ringback generated by originating
device.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Louis R.
Marascio
Sent: Wednesday, August 10, 2005 2:38 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Question about PSTN ringback


Is there any way to control whether ring back comes from the gateway
when placing calls to the PSTN.  I have a group of devices that I don't
want to hear PSTN ring back on, however I can't seem to find any way to
control this.

Thanks,

Louis

---
Louis R. Marascio
Metreos Corporation
t: +1 (512) 687 2005
m: +1 (512) 964 4569
e: marascio at metreos.com



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip