[cisco-voip] Dumping CM Info and Config ?

[Wes Sisk]

you might try 'show tech' from cmd prompt on CM.  This is raw database dump
in most cases.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Kevin Thorngren
Sent: Monday, August 15, 2005 2:49 PM
To: Tech Guy
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Dumping CM Info and Config ?


Hi Dane,

Most of what you asked for can be found in the Route Plan Report.  You
can get a CSV copy of the Route Plan Report by going to CCMAdmin >
Route Plan > Route Plan Report.  Click on the "View in CSV" link on the
right side of the web page.

HTH,
Kevin
On Aug 15, 2005, at 2:13 PM, Tech Guy wrote:

> Is there a good way of dumping ones callmanager configuration and
> info, much like a "show tech" on a router?
>
> I ask because we are getting quotes on IPCC for our existing AVVID
> solution, and vendors are asking alot of questions and stuff and it
> would be easier to just be able to do some sort of dump on CM to
> provide them the info.
>
> They want to know extensions, partitions, CSS, translation patterns
> and on and on.. lots of stuff that would take tons of time to document
> it seems.  Hoping others know of better ways to get all this info.
>
> Thanks!
>
> Dane
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip