[cisco-voip] CCM - Attendant console and multi-tenant

[Vincent De Keyzer]

Cool ! Now users appear in the list, and I can even transfer calls to them.

 

But the “status” functionality does not work: it shows a blue question mark
instead of the promised icons. Any idea what I am missing?

 

Vincent

 

 

 

  _____  

From: Kevin Thorngren [mailto:kthorngr at cisco.com] 
Sent: mercredi 17 août 2005 14:48
To: Vincent De Keyzer
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM - Attendant console and multi-tenant

 

Hi Vincent,

This URL describes the syntax of the user defined file:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration
_guide_chapter09186a00801ec5a5.html#1117660

HTH,
Kevin
On Aug 17, 2005, at 4:36 AM, Vincent De Keyzer wrote:

Hello,
 
we are using CCM in a multi-tenant evironment, and I would like to start
using the attendant console for some of the tenants.
 
Unfortunately, I can’t use the corporate directory to show the status of
lines, since this would show to one tenant all users of the system, and not
his users only (the corporate directory does not seem to understand the
concept of partitions).
 
I have seen in the “advanced settings’” of the attendant console a “local
directory file” parameter – does anybody have an idea whether this could be
used for the purpose of creating a local static file of users (which would
be, if not ideal, better than nothing)? If yes, what would be the syntax of
this file?
 
Thanks in advance,
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050817/ceffe27c/attachment-0001.html