[cisco-voip] CCM - Attendant console and multi-tenant

[Wes Sisk]

configure a static xlation for 1 UDP port, force the client to always use
the same port number.  This should work, no?

/Wes

-----Original Message-----
From: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
Sent: Wednesday, August 17, 2005 11:21 AM
To: 'Wes Sisk'; 'Kevin Thorngren'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM - Attendant console and multi-tenant


Thanks Wes,

> When you do a search in
> the directory window, acclient sends a subscribe message to ACServer to
> receive linestate updates for the lines in the directory search result
> set.
> ACServer then sends linestate updates down to the client in UDP packets.
>
> The client selects an ephemeral port to receive LSS updates by default but
> can be configured to use a static port.  on the clent, settings, advanced,
> local host ip address (for line state)
>
> ACClient subscrption shows up in ACServer traces as:
> ServerClient subscribelinestate: inet address: 172.18.120.120 Port: 1818
>
> if any LSS updates are available ACServer sends those down:
> Sending 0 linestate(s) sent to client: 172.18.120.120

So I understand there is no way to get this working through a NATting
firewall: the attendant console has an inside address, which is NATted to a
outside address for the outgoing TCP session to the server; but UDP packets
are sent to the inside address - which does not make any sense outside of
the firewall.

I have tried to configure an outside address on the client, but it won't
accept it since the outside address does not appear on any of its NICs.

I'll place the machine outside of the firewall.

Thanks for the insight

Vincent