[cisco-voip] CCM ports not in listening state

[Wes Sisk]

all these ports are opened by ccm.exe.

is ccm.exe running?

port 2000 is configurable.  /ccmadmin->system, cisco callmanager, select
server, ethernet phone port

'analog port' on the same page should be 2002
3223 is CCM's UDP line state server. can be disabled by service, service
parameters, cisco callmanager, Line State Update Enabled

udp:3000 is supposed to be opened by ctftp.exe, Cisco TFTP server.  Not sure
what this one is used for offhand.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Ryan Ratliff
Sent: Thursday, August 18, 2005 3:55 PM
To: Jignesh Desai
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM ports not in listening state


What state are they in?

Can you send the output of 'netstat -an'?

-Ryan
On Aug 18, 2005, at 3:21 PM, Jignesh Desai wrote:

What does it mean when ports, 3000, 3223, 2002, and 2000 are not in
listening state?  This is on Pub and Sub.
 
Thanks

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip