[cisco-voip] mcs-7825 questions running 4.0

[Madziarczyk, Jonathan]

My understanding is that CCM 4.0 currently only supports SIP trunks and
not SIP endpoints (phones).  CCM 5.0 is supposed to support SIP
endpoints whenever it comes out.  

Hope that helps.

JM


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Carter
Sent: Tuesday, August 30, 2005 10:30 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] mcs-7825 questions running 4.0 

My biggest concern is that CCM 4.0 must support SIP protocol. Please
advise
as to whether it does or not.

The second concern is  how many concurrent calls or IP SIP phone
does the CCM  do ? And do I need to have a call/endpoints licenses
installed ? For example, some of the products come with 2
calls/endpoints
licenses, meaning I can only have two calls/endpoints going through it.
If I want to have 10 calls/endpoints going through it, must I purchase
install 10 calls/endpoints licenses?


TIA

Michael Carter
Account Manager
Alta Technologies Inc
763-475-5327
800-546-2582 (327)
AIM mikec at alta
yahoo IM cartematalta
mike.c at altatechnologies.com
Sun IBM HP Cisco Nortel Juniper Adtran
D-Link Emulex Qlogic Overland Storage
We buy and sell all of the above...please email your offers or requests.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip