[cisco-voip] Voice Quality issue; Echo

[Mark Snow]

Aaron,

An ERL plan must have at least a 6db difference between the Tx and Rx sides
of the ECAN to converge. Without this difference between the two, the ECAN
will never even engage ....

And to answer your question (and it's not the preferred answer I'd like to
give) but yes, an ECAN can take up to 3 seconds to fully converge, though a
lot of times it is much quicker than that ...

What version of code on what box are you running?
Thought of running the VIC2 with the Extended 128ms ECAN daughter card?


-Mark
CCIE Voice #14073



> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of DeRooy, Aaron H
> Sent: Friday, December 02, 2005 8:44 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Voice Quality issue; Echo
> 
> The customer is complaining of echo. If I change the echo canceller
> coverage to 32ms and the ERL to 4db, what effect will that have? Will it
> cause the echo canceller to take up to 3 seconds to converge or maybe
> result in sentences being chopped off? Looking for any guidance on
> making echo canceller coverage and/or erl changes.
> 
> Aaron
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip