AW: [cisco-voip] RASAggregator trunk issue
Jens Faulhaber
jfaulhaber at avodaq.com
Tue Dec 6 11:00:54 EST 2005
Its in configured in the CM as a H.323 Client - but gatekeeper controlled. -> in the NetMeeting we entered the GK address and E.164 info.
-----Ursprüngliche Nachricht-----
Von: Ryan Ratliff [mailto:rratliff at cisco.com]
Gesendet: Dienstag, 6. Dezember 2005 16:57
An: Jens Faulhaber
Cc: cisco-voip at puck.nether.net
Betreff: Re: [cisco-voip] RASAggregator trunk issue
Is H323TRM03 added as an H.323 gateway in the CCMAdmin? By default
CM will not accept calls from H.323 endpoints that are not in the
database.
-Ryan
On Dec 6, 2005, at 10:31 AM, Jens Faulhaber wrote:
Hi Guys mabe one of you can help us.....
We have the following issue:
We are using CCM 4.1.3 SR 1 and we have the issue that the
RASAggregator trunk is not working properly.
It is setup as described in the SRND but our NetMeeting clients are
not able to call any client registered on CCM. They can receive calls
but cannot set up the call by themselves.
The configuration looks like that.
H323TRM01 - gatekeeper controlled - this is the RASAggregator trunk
to our gatekeeper - and successfully registered on the GK. With the
DN 1101
H323TRM03 - registered on CCM via IP with the DN 1002
Gatekeeper on 2611 with IOS 2600-ix-mz.123-14.T5.bin and the GK config.
zone local sj-zone cisco.com invia sj-zone outvia sj-zone enable-
intrazone
gw-type-prefix 1#* default-technology
no use-proxy sj-zone default inbound-to terminal
no use-proxy sj-zone default outbound-from terminal
no shutdown
endpoint ttl 60
the GK show command show that everything should be fine....
GK01#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type
Flags
--------------- ----- --------------- ----- --------- ----
-----
10.1.1.1 49875 10.1.1.1 49821 sj-zone H323-GW
H323-ID: RasAggregator16_sj-zone_1
Voice Capacity Max.= Avail.= Current.= 0
10.128.128.65 1720 10.128.128.65 2295 sj-zone TERM
E164-ID: 1103
10.128.128.113 1720 10.128.128.113 2363 sj-zone TERM
E164-ID: 1101
Total number of active registrations = 3
GK01#sh gatekeeper gw-type-prefix
GATEWAY TYPE PREFIX TABLE
=========================
Prefix: 1#* (Default gateway-technology)
Zone sj-zone master gateway list:
10.1.1.1:49875 RasAggregator16_sj-zone_1
The CallManager can process the call from H323TRM03 (non GK
controlled) to the H323TRM01 (GK controlled)
In the CCM trace we find the info that the CCM cannot process the
call because he does not find the DN or GW
We find that CC trace output for every unsucessfull call:
}|<CLID::StandAloneCluster><NID::10.1.1.1>
12/06/2005 10:56:42.942 CCM|}|<CLID::StandAloneCluster><NID::10.1.1.1>
12/06/2005 10:56:42.958 CCM|H225Handler::getSourceE164Address ERROR
Could not find e164 address|<CLID::StandAloneCluster><NID::
10.1.1.1><CT::1,100,132,143.1><IP::10.128.128.113><DEV::>
12/06/2005 10:56:42.958 CCM|e164 H225Handler::parseAndFwdH225uuie
ERROR Incoming H225 call, Could not find H225D (client or gateway is
missing)|<CLID::StandAloneCluster><NID::10.1.1.1><CT::
1,100,132,143.1><IP::10.128.128.113><DEV::>
12/06/2005 10:56:42.958 CCM|value H323-UserInformation ::= |
<CLID::StandAloneCluster><NID::10.1.1.1>
And now the Gatekeeper gets a DRQ from the CCM and the call fails....
Do you have any ideas where our issues are?
___________________
Jens Faulhaber
Senior IT-Consultant
avodaq AG
Moosstraße 16
82319 Starnberg
Tel.: +49 8151 36858347
Mobil: +49 163 7788247
Fax: +49 8151 91 8382
http://www.avodaq.com
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list