[cisco-voip] Out palse a name

[Fred Nielsen]

Depends on your carrier and trunk type.  Many carriers will allow you to
send whatever digits you wanted for calling party (caller ID or ANI) for an
outbound call on PRI or BRI.  Some restrict you to sending only those
numbers that are associated with your trunk.

No U.S. carriers I'm aware of support customer provided calling party name
fields however.  You can send them on something like a PRI, but they will
almost surely be ignored.  Many carriers now provision a static name (i.e.
"Company X") that those with Caller ID will see when establishing a customer
trunk these days.

Fred Nielsen
AT&T Inc.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James
Sent: Tuesday, December 06, 2005 7:24 AM
To: CiscosupportUpuck
Subject: [cisco-voip] Out palse a name

Is there anyway for me to out pulse a company name on cm.  I was told the
the carrier has to do name and we can do number if we wanted to
James D. Grace 
System Engineer
CCNP CCNA MCSE MCDBA 
Digitel Corp.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip