[cisco-voip] Vt advantage

[Jim Koniecki]

James,

This is how I have it working 


VTadv---(USB)----LAPTOP----IPPhone1001-----SWITCH
VTadv---(USB)----LAPTOP----IPPhone1002-----SWITCH

Then just follow this
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186
a00802345f4.shtml

Components Used 
The information in this document is based on these software and hardware
versions: 

Cisco CallManager 4.01 with SR2a or later 

Cisco IP phones 7960G and 7940G with phone loads 6.0(4) or later



Jim Koniecki 


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James
Sent: Sunday, December 11, 2005 7:07 PM
To: CiscosupportUpuck
Subject: [cisco-voip] Vt advantage

I'm trying to set up vtadvantage.  But I'm not having luck on enabling video
on my 7940.   I don't see how to make the vidoe icon appear. And not sure if
this is related but when I open vtadvantage it does no detect my ip phone.
I am connected to the ipphone swith 
James D. Grace 
System Engineer
CCNP CCNA MCSE MCDBA 
Digitel Corp.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip