[cisco-voip] Slips errors in a Q.SIG connection

Mon Dec 12 06:20:46 EST 2005

Yes, I have it.

I attach the config related with the voice part:

aaa session-id common

!

resource policy

!

clock timezone GMT+1 1

network-clock-participate wic 0 

ip subnet-zero

!

!

ip cef

no ip dhcp use vrf connected

!

!

no ip domain lookup

no ftp-server write-enable

isdn switch-type primary-qsig

!

voice-card 0

 no dspfarm

!

controller E1 0/0/0

 clock source line primary

 pri-group timeslots 1-31 service mgcp

!

controller E1 0/0/1

 pri-group timeslots 1-31 service mgcp

!

!

!

interface GigabitEthernet0/0

 ip address 47.193.64.3 255.255.255.0

 duplex full

 speed 100

!

interface GigabitEthernet0/1

 no ip address

 shutdown

 duplex auto

 speed auto

!

interface Serial0/0/0:15

 no ip address

 isdn switch-type primary-qsig

 isdn incoming-voice voice

 isdn bind-l3 ccm-manager

 no cdp enable

!

interface Serial0/0/1:15

 no ip address

 isdn switch-type primary-qsig

 isdn incoming-voice voice

 isdn bind-l3 ccm-manager

 no cdp enable

!

ip classless

ip route 0.0.0.0 0.0.0.0 47.193.64.1

!

!

i

!

control-plane

!

!

!

voice-port 0/0/0:15

 cptone ES

!

voice-port 0/0/1:15

 cptone ES

!

ccm-manager switchback immediate

ccm-manager redundant-host 47.222.64.2

ccm-manager mgcp

!

mgcp

mgcp call-agent 47.193.64.2 service-type mgcp version 0.1

mgcp bind control source-interface GigabitEthernet0/0

mgcp bind media source-interface GigabitEthernet0/0

!

mgcp profile default

!

!

!

dial-peer voice 1 pots

 service mgcpapp

 port 0/0/0:15

!

dial-peer voice 2 pots

 service mgcpapp

 port 0/0/1:15

!

!

!

End

Regards,

Ruben

  _____  

De: Brian Henry [mailto:Brian.Henry at apptis.com] 
Enviado el: lunes, 12 de diciembre de 2005 12:18
Para: Ruben Montes
Asunto: Re: [cisco-voip] Slips errors in a Q.SIG connection

Do you have the.command network clock participate wic x?
--------------------------
Sent from my BlackBerry Wireless Handheld

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
<cisco-voip-bounces at puck.nether.net>
To: cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Sent: Mon Dec 12 06:09:08 2005
Subject: [cisco-voip] Slips errors in a Q.SIG connection

Hello,

I have a connection between a PBX MD110 and a Cisco router C2851 running
MGCP. I have Slips errors all the time, counter is increasing every few
seconds. Calls are working well but I have a lot of errors. The MD110 is
configured to supply the clock and this is the config in the router:

controller E1 0/0/0

 clock source line primary

 pri-group timeslots 1-31 service mgcp

!

controller E1 0/0/1

 pri-group timeslots 1-31 service mgcp

I configured the 'clock source line primary' in one of them but both
QSiGs have the same Slip errors:

r2851ctp01#sh controllers e1

E1 0/0/0 is up.

  Applique type is Channelized E1 - balanced

  No alarms detected.

  alarm-trigger is not set

  Version info Firmware: 20050620, FPGA: 16, spm_count = 0

  Framing is CRC4, Line Code is HDB3, Clock Source is Line Primary.

  CRC Threshold is 320. Reported from firmware  is 320.

  Data in current interval (422 seconds elapsed):

     0 Line Code Violations, 0 Path Code Violations

     48 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

     48 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs

E1 0/0/1 is up.

  Applique type is Channelized E1 - balanced

  No alarms detected.

  alarm-trigger is not set

  Version info Firmware: 20050620, FPGA: 16, spm_count = 0

  Framing is CRC4, Line Code is HDB3, Clock Source is Line.

  CRC Threshold is 320. Reported from firmware  is 320.

  Data in current interval (423 seconds elapsed):

     0 Line Code Violations, 0 Path Code Violations

     48 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

     48 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs

Any idea? The config in the CCM side is almost the default...

Regards,

Ruben

________________________________

De: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] En nombre de Leetun, Rob
Enviado el: martes, 06 de diciembre de 2005 18:27
Para: Voll, Scott; Lelio Fulgenzi; Jeffrey C. Ollie;
cisco-voip at puck.nether.net
Asunto: RE: [cisco-voip] CDR Reporting Tool

Dido here.  Our Oracle developers built a package in Crystal Reports for
management, which spits out about 10 to 15 different reports each month.

Rob

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, December 06, 2005 10:13 AM
To: Lelio Fulgenzi; Jeffrey C. Ollie; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CDR Reporting Tool

we used our in house programmers and told them what we needed and they
came up with a custom app for us.  Not web based but it interfaces with
our billing system to automagically send bills each month based on total
toll charges.  took him about 2.5 hours to do.

Scott

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Lelio Fulgenzi
Sent: Tue 12/6/2005 8:32 AM
To: Jeffrey C. Ollie; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CDR Reporting Tool

I'd also like to hear about such a beast.

But I'd also like to hear about people's experience with setting up
their own reports using a custom SQL report tool. I've looked at a few
out there that seem quite good and allow you to create SQL reports with
user input and are web based.

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I had a coffee and Coke at lunch today...and now, I've got more jitter
than an
IP phone on a long haul 10base2 connection"
LFJ

        ----- Original Message -----

        From: Jeffrey C. Ollie <mailto:jeff at ocjtech.us> 

        To: cisco-voip at puck.nether.net

        Sent: Tuesday, December 06, 2005 11:26 AM

        Subject: [cisco-voip] CDR Reporting Tool

        Can anyone point me to a CDR reporting tool that:

        1) Will directly access the Cisco CDR database (we've used
Infortel but
        it discards a lot of the information in the Cisco CDR records).
        2) Provides more advanced reporting capabilities than ART
provides.
        3) Specifically targeted at CDR reports, not some generic SQL
reporting
        tool.

        Jeff Ollie

        _______________________________________________
        cisco-voip mailing list
        cisco-voip at puck.nether.net
        https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051212/791bf8f5/attachment-0001.html