[cisco-voip] Which g/w is my call using

[Voll, Scott]

https://cm/dna

 

Dial number analyzer works well if you have it setup also.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, December 13, 2005 7:46 AM
To: DeRooy, Aaron H; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Which g/w is my call using

 

If you go to the webpage of the phone and go to streaming statistics,
you should see something like this:

 

Remote Address 

 

<ipaddr>/<port>

Local Address

 

<ipaddr>/<port>

 

This is what I use to see what gateway it is using. We use 6008 T1/PRI
MGCP and it works well.

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I had a coffee and Coke at lunch today...and now, I've got more jitter
than an
IP phone on a long haul 10base2 connection"
LFJ

	----- Original Message ----- 

	From: DeRooy, Aaron H <mailto:Aaron.Derooy at xerox.com>  

	To: cisco-voip at puck.nether.net 

	Sent: Tuesday, December 13, 2005 10:39 AM

	Subject: [cisco-voip] Which g/w is my call using

	 

	Without doing a debug or show command on the g/w itself, does
anyone
	know how I can find out which g/w a particular call is using? I
tried
	looking at the Event Viewer but it did now update with an entry
when I
	made  a PSTN call but it did not update.
	Thanks,
	Aaron
	
	
	
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051213/ab312d49/attachment.html