[cisco-voip] need help moving off sip to mgcp

[Ryan Ratliff]

Check out http://www.cisco.com/en/US/tech/tk652/tk701/ 
technologies_tech_note09186a0080094584.shtml.  It describes moving  
from sip to sccp, but for MGCP the process should be similar.

In general you need a tftp server with OS79XX.TXT configured with the  
image you wish to load.  At boot the phone will compare the first  
several characters of that image with what it is currently running  
and if the protocol is different (ie sccp, sip, mgcp) then it will  
load the new firmware.

-Ryan

On Dec 14, 2005, at 3:33 PM, Mike Carter wrote:

Hi all

Customer has 7940G which were upgraded to SIP -- they need to use  
MGCP.  How
do they switch Protocols???

they've already unlocked the cofig and tried to override with no  
luck...any
idea would be greatly appreciated

Anyone that has the time for a tech call to assist please contact me  
asap

TIA

Michael Carter
Account Manager
Alta Technologies Inc
763-475-5327


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip