[cisco-voip] Cisco 7935 firmware issues

[IT]

Hello,

I have inherited a Cisco 7935 and I am running CM 4.0
I am having trouble getting the 7935 to pick up new firmware. I have a
tftp server running on my CM Publisher, and the device defaults are set
correctly for the firmware version. However, the screen only displays:
Station IP: 10.96.3.58
Contacting: 10.96.3.11 (my tftp server)

When I go to http://10.96.3.58 I get:
Wind Web Server Error Report:
Server Error: 501 Not Implemented
No RPM for this combination of URL and method
/dynaform/index_Dyna.htm

I am able to telnet to 10.96.3.58, but I get a username & password
prompt, but I do not know the password, and cisco/cisco doesn't work.

Does anyone know how else I can force flash this device?

On another note, I had to explicitly set the VLAN on my switch, as the
device was picking up the data vlan when connecting, shouldn't this
device auto register on the voice vlan?

Thanks,
Avidan

******************************************************
This email may contain trade secrets and/or other information that is 
proprietary and/or confidential. Use of this by anyone other than the 
intended recipient(s) is prohibited and may be unlawful. If you are not 
the intended recipient, delete the e-mail and notify us immediately.
******************************************************