[cisco-voip] Caller Name ID possible via Facility IE with H.323?

[Trey Howland]

CSCdu81533 is in a closed state and no mention of any work to add the  
feature.  TAC's only suggestion was to move to MGCP.

CSCdu81533 - Caller name display in q931 facility msg is not processed  
and passed Release-note: Name display received in Q931 facility msgs is  
not processed and passed onto h225 by IOS gateways. There is no  
workaround.




On Dec 15, 2005, at 11:55 PM, Erick Bergquist wrote:

> Here's what I found from previous discussion on this
> topic on this list and at forums.
>
> http://forum.cisco.com/eforum/servlet/NetProf? 
> page=netprof&forum=IP%20Communications%20and%20Video&topic=IP%20Telepho 
> ny&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd93785/2
>
> The cisco forum has someone from cisco indicating
> support for facility IE will be there next year, but
> no way to confirm or if it'll be a CME-only feature.
> If it were in IOS, then it would need to be passed to
> CCM in messages CCM could understand also.
>
> The following is a snippet from a previous post here I
> had saved, not sure who it was from but was regarding
> the isdn supp-service command. Maybe is only effective
> with SIP? I have not had need to use this command
> myself yet. (Sorry for formatting below).
>
>
>
Georgia Institute of Technology     Atlanta, Georgia
Georgia Tech Research Institute
Electronic Systems Laboratory

Public Key ID: 0x894F4419
[7338 D848 8BEE FF6D 23D1  4355 2F6C DE0C 894F 4419]