[cisco-voip] References for shared lines 3.3

[Lelio Fulgenzi]

I'm not aware of any two-stage ringing options with either the phones or with IPMA. Perhaps IPMA has undergone some changes, it has been a while since I've played with it.

You can get what you are looking for if you are willing to use another line appearance on the phones. The first line appearance on phone A rings, the first line appearance on phone B flashes. The FwdNoAnswer target is another line on each phone with different ring behaviour.


  ----- Original Message ----- 
  From: Candace Holman 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, December 16, 2005 6:22 PM
  Subject: [cisco-voip] References for shared lines 3.3


  Does anyone have a good reference for implementing shared lines with 
  ring delay in CM 3.3?  We want the phone to ring on device A, but only 
  flash (at first) on device B where the second shared line appearance 
  lives.  User B can pick it up on flash or on ring.  Is this a job for IPMA?

  Candace


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051216/0026ea6d/attachment.html