[cisco-voip] Call rings phones once and then drops

[TechGuy]

Here is the debug:

emb3845#debug isdn q931
debug isdn q931 is              ON.
emb3845#
*Dec 17 20:07:23.806: ISDN Se0/1/1:23 Q931: RX <- SETUP pd = 8  callref =
0x00D2
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98381
                Exclusive, Channel 1
        Calling Party Number i = 0x2183, '3375015555'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '4080'
                Plan:Unknown, Type:Unknown
*Dec 17 20:07:24.830: ISDN Se0/1/1:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x80D2
        Cause i = 0x80A9 - Temporary failure
emb3845#


More info on the problem.  This router has two local PRI trunks coming in to
a 2MFT card.  It also has two CAS (E&M Wink) trunks coming into a 2MFT card
for long distance and incoming toll free.

The two CAS trunks work fine.  We are able to get incoming calls via the CAS
trunks mentioned above with no problems.  Also, we have another gateway
configured on the same callmanager in a similiar fashion and all works
fine.  This was all working earlier this morning.  No known changes occured
between when it worked and stopped working.

Quite an interesting problem, we have TAC on the line now but thought I
would see what others think.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051217/3bcb8972/attachment.html