SV: VB: [cisco-voip] Changes not being activated

[Robin Inderberg]

Goodmorning,

I am running CM 4.1(3), just have updated it and added a publisher.
I think it must be after these changes everything started to make some problems. I restarted CM01 and CM02 yesterday, and after that my changes took effect. Tried to restart the DBL Monitor yesterday too, and I could not control the phones. Could not make a restart and no updates were taking power.

Thank you very much for your time, Rasmin and Ryan!


Best regards


/Robin Inderberg

-----Ursprungligt meddelande-----
Från: Ryan Ratliff [mailto:rratliff at cisco.com] 
Skickat: den 21 december 2005 15:19
Till: Robin Inderberg
Kopia: cisco-voip at puck.nether.net
Ämne: Re: VB: [cisco-voip] Changes not being activated

What version of CM are you running?

There are a few ways change notification can break in CM 4.x.  The  
first thing to try would be to restart the Cisco Database Layer  
Monitor service on the publisher and then try to update a phone via  
the CCMAdmin.  If you can even reset a phone via CCMAdmin then change  
notification is working.

-Ryan

On Dec 21, 2005, at 5:32 AM, Robin Inderberg wrote:

Hi once again,



Just a little update on the case, no changes is getting understood by  
the CCM. The changes is visible on the ccmadmin, and I can add  
phones, change things on DN, but the changes does not get active.



Regards once again





/Robin

Från: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] För Robin Inderberg
Skickat: den 21 december 2005 11:10
Till: cisco-voip at puck.nether.net
Ämne: [cisco-voip] Changes not being activated



Hi,



I cant manage this one by my self, don´t realy know what could be  
wrong. And I think that one of you has the answer (as always) J.



I have a DN that a customer often uses CFA on, he often sets CFA to  
his cellphone, everything worked well, he could add a CFA number and  
disable it. But now the change does not take any effect, he can  
disable it, everything looks fine in the phone. But the CFA doesn't  
get disabled. Now I have checked the Enterprise Manager and looked  
for a CFA on his DN, but could not find anything. I tested to remove  
his DN, and just see if the CFA or the change did get power, but no.  
The DN is there, and forwards to his cellphone.





I have tried to restart the DBL monitor, but it didn't help.



Anyone who has an idea of what could cause this one?





Best Regards









Robin Inderberg

robin.inderberg at candidator.se



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip