[cisco-voip] IOS MGCP question

[Craig M Staffin]

Correct we could use the port off of one of the call manager servers but 
we have a geography problem.  Our Call Manager server are located in 
Milwaukee and Cleaveland.  Where as our voicemail system is located in 
Milwaukee and also in Brazil.

So unfortionatly the only thing we can do is use the red headed stepchil 
and hope cisco does not end support for it or comes out with something to 
replace it wtih.

Thanks,
__________________________
Craig Staffin
Network Analyst
Global Network and Telecomunnications
Rockwell Automation
cmstaffin at ra.rockwell.com
(414) 382-2309






Justin Steinberg <jsteinberg at gmail.com>
Sent by: cisco-voip-bounces at puck.nether.net
12/23/2005 11:52 AM

 
        To:     CMStaffin at ra.rockwell.com, cisco-voip at puck.nether.net
        cc: 
        Subject:        Re: [cisco-voip] IOS MGCP question


I agree, the VG248's do a fine job integrating the callmanager with
older voicemail systems that use SMDI integration.

However, you could also use the Cisco Message Interface service on the
CallManager for SMDI integration.  You would then run the SMDI link
from the CallManager's serial port to your voicemail system.  You
would still need a gateway of some sort but aleast you have options
other than VG248.

I have no problem with the VG248, it does a fine job - but it has
always seemed like the red headed stepchild.  The newest code 1.3.1
doesn't even exist on the bug toolkit.  I'm mentioned that to TAC
before - i think it is to encourage people to migrate to Unity. :)

Justin

> Date: Fri, 23 Dec 2005 10:17:14 -0600
> From: Craig M Staffin <CMStaffin at ra.rockwell.com>
> Subject: Re: [cisco-voip] IOS MGCP question
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: cisco-voip-bounces at puck.nether.net, "Ortiz, Carlos"
>        <CORTIZ at broward.org>,   cisco-voip at puck.nether.net, Ed Leatherman
>        <ealeatherman at gmail.com>
> Message-ID:
> 
<OFFFCCD3CC.D31E53CE-ON862570E0.005922ED-862570E0.00597773 at ra.rockwell.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Actually I would love to contribute right now that is our only way to
> integrate our Audix voicemail into the call manager cluster.  By using
> SMDI over the Async port of the VG248
>
> Thanks,
> __________________________
> Craig Staffin
> Network Analyst
> Global Network and Telecomunnications
> Rockwell Automation
> cmstaffin at ra.rockwell.com
> (414) 382-2309
>
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051223/4ab6742a/attachment.html