[cisco-voip] Dial peer usage on H323 g/w

[Erick Bergquist]

Hi,

You could also do a 'show dial-peer voice | inc
tag|Calls|Connect Time' and this will output the
dial-peer id (tag) and number of calls attempted,
successful, failed, etc and total time calls have been
connected using that dial-peer since counters were
cleared or router was rebooted.


--- "Fretz, EA Eric @ IS" <Eric.A.Fretz at L-3com.com>
wrote:

> You might look at some of the DIAL-CONTROL mibs
> available on your router.
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of DeRooy, Aaron H
> Sent: Friday, December 23, 2005 9:29 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Dial peer usage on H323 g/w
> 
> 
> Anybody know a quick way to monitor dial peers? I
> want to clean up my h323
> g/w and it would be nice to know which dial peers
> get used and which never
> get used. There must me an easy way to figure this
> out without tracking
> individual calls using debug and/or show commands.
> Thanks,
> 
> Aaron 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



	
		
__________________________________ 
Yahoo! for Good - Make a difference this year. 
http://brand.yahoo.com/cybergivingweek2005/