[cisco-voip] Configing

[Kevin Thorngren]

It would be good for you to provide more detail on what you are trying  
to do.

Are you trying to do voice or data?

Do you have WIC, VWIC or HWIC interfaces or something else?

You may need to add the "card type t1" command, for example:
http://www.cisco.com/en/US/products/hw/routers/ps221/ 
prod_configuration_guide09186a00800a4063.html

Kevin


On Dec 27, 2005, at 8:11 PM, James wrote:

> Where to I cong the t1 seting for. A p2p on my gateway.  I'm looking  
> for where do I put the bazs line coding and stuff.   The reason I'm  
> asking is because. We don't get the controller on the routrer config.   
> Only serial
> James D. Grace
> System Engineer
> CCNP CCNA MCSE MCDBA
> Digitel Corp.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>