[cisco-voip] Inbound Calling Name

[Wes Sisk]

4ess is the only protocol CM cname feature does not work for.
cname = name delivery via facility IE.

if your carrier/pbx can send it in a DisplayIE CM will display it.

/Wes
On Dec 19, 2005, at 4:39 PM, Jason Burwell wrote:

On CCM 3.3.4 can you get Inbound Calling Name when using 4ESS  
Protocol? Using 6608 as a Gateway.

Thanks!
Jason


**********************************************************************
The information transmitted is intended only for the person or entity  
to which it is
addressed and may contain confidential and/or privileged material.  
Any review,
retransmission, dissemination or other use of, or taking of any  
action in reliance upon,
this information by persons or entities other than the intended  
recipient is prohibited.
If you received this in error, please contact the sender and delete  
the material from
any computer.
**********************************************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051229/c1a77ed6/attachment-0001.html