[cisco-voip] Analog line extension

[Wes Sisk]

HDA FXO module does the highest FXO port density I can think of.   
Other than the old 8/16 port fxo cards for the ICS chassis.

/Wes

On Dec 19, 2005, at 12:56 PM, Brian Turnbow wrote:

Hello all,
I have a need to extend 32 analog lines over an IP network with fxs  
on one side and fxo on the other side.
I need to set up hotline for each port so that when the phone goes  
off hook it connects automatically to the specified port on the other  
end.

I can't change to ISDN and need to maintain the actual analog  
configuration. (I've tried to convice them to change architecture but  
it's a no go)

That being said I thought of the cisco IAD, but it seems to only  
offer high port density with FXS lines not FXO…
Any suggestions on euipment ?

Thanks
Brian


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051229/0ce42336/attachment.html