[cisco-voip] Simple (?) TCL IVR script

[Dave Temkin]

Looks like it's not written in TCL, but it was worth a shot anyways :-)

Thanks tho.
-Dave

On Tue, 1 Feb 2005, Tim Reimers wrote:

> oh duh!!   I got so involved in describing what they're doing that I
> forgot the link!
>
> http://www.irlp.net
>
> -----Original Message-----
> From: Dave Temkin [mailto:dave at ordinaryworld.com]
> Sent: Tuesday, February 01, 2005 8:39 AM
> To: Tim Reimers
> Cc: cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Simple (?) TCL IVR script
>
> Any links?  I could take a look.  Playing an .au file in would work fine
> for me, too.
>
> -Dave
>
> On Tue, 1 Feb 2005, Tim Reimers wrote:
>
> > Hi Dave-
> >
> > This is a strange possibility for you, but:
> >
> > There's a neat project going on in Amateur Radio where they're using
> > VOIP technologies
> > to pass audio streams over the Internet between amateur radio
> operators
> > in foreign countries
> > (whilst we use our little local VHF radios, rather than the long
> > distance HF ones)
> >
> > They have the ability to play audio streams from the far end-
> > When I (here in Asheville NC) bring up the node in Trinidad, it plays
> me
> > a message-
> > so perhaps that same code they're using?
> >
> > I haven't looked, but I wonder if they're playing a UDP file into the
> > stream I'm listening to, then connecting me to the repeater audio-
> >
> > Sequence of events:
> >
> > 1. I activate the local repeater on 146.640 Mhz
> > 2. I annouce that I'm bringing up a node and enter the DTMF keys for
> > that node's ID
> > 3. After about 4-5 seconds, it says "Welcome to Trinidad and Tobago,
> > land of the steelpan..."
> > 4. Then, it says "Link connected", there's a 'click' and I'm suddenly
> > hearing the audio from the repeater in Valsayn, Trinidad.
> >
> > Pretty cool!
> > and completely open-source--
> > It's a RedHat Linux powered set of programs
> >
> > The reason I explain all of this, is because they have downloadable
> > scripts and so on that
> > do things on the nodes- like announce local temperature, etc..
> >
> > Seems like that's about what you're looking for - a way to announce
> > something 'into' the UDP stream...
> >
> > Tim
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dave Temkin
> > Sent: Tuesday, February 01, 2005 7:54 AM
> > To: cisco-voip at puck.nether.net
> > Subject: [cisco-voip] Simple (?) TCL IVR script
> >
> > Before I embark on trying to figure out the TCL IVR scripting language
> > for
> > Call applications, I was wondering if someone had something pre-baked
> > that
> > did one of the two following things:
> >
> > 1) Played a beep tone before or during  connecting the call.  Simple
> as
> > that!
> >
> > 2) Read back the dialed digits (or destination pattern matched) before
> > or
> > during connecting the call.
> >
> >
> > Basically I've got an application where it dumps the user into what's
> > effectively a poor-man's conference bridge (hoot 'n' holler over IP)
> and
> > I'd like to provide some kind of positive acknowledgement that they're
> > connected to *something* when they dial in.
> >
> > Any help appreciated...
> >
> > -Dave
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>