[cisco-voip] VG248 and 'auto' enable policy

[Lelio Fulgenzi]

We've deployed a few vg248s using the 'auto' enable policy, which is great, because you don't have to telnet it to enable a port once configured and plugged in.

However, when you delete a phone, it remains disabled. This causes a large amount of event entries.

Have other people run into the same problem? Is this a bug? Have I not configured things properly?

If this is expected behaviour, we'll likely have to forgo the auto enable and manual enable/disable each port as required. Not bad now since our main migration is over.

  ----- Original Message ----- 
  From: Seth Call 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, February 15, 2005 3:37 PM
  Subject: [cisco-voip] Unity + Call Forwarding


  Scenario:  Call Forward All is set on a phone to forward across an H.323 trunk.
  Question:  Can Unity be configured to use the voicemail associated with the phone that was first called; not the forwarded-to phone?

  Thank you,
  Seth Call


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050215/d7d53c59/attachment.html