[cisco-voip] CCM and Faxing Design Question

[Court Schuett]

I have a bit of an odd question.

We have a server set up as a fax server.  It is running GoldFax (a
fairly generic fax server that handles fax modem calls).  Right now, we
are using FXS ports to send calls coming in on a PRI to the analog
modems.  We use Call Manager to route the calls based on in bound number
dialed and availability of the modems.  (The FXS ports are set up as
MGCP ports and I use a hunt group to find a free one)

What I would like to do is expand this greatly.  I would like to take a
PRI from the local telco, run it into a gateway and then send it back
out to the fax server.  Is that possible?  Everyone I work with seems to
think that it isn't possible, but that doesn't make sense to me.  

I want to retain control of the phone numbers and where they go.  I
can't get the control I get from Call Manager from the Telco.


Thanks for all your help.  It is greatly appreciated.

-Court