[cisco-voip] SIP and H323

[Lupi, Guy]

I have heard that the NexTone session border controllers do a very good job
of protocol conversion, perhaps it would be worth looking into.  If I
remember correctly you have your gateways set up for SIP and have your H323
device communicate with the NexTone, it will do the conversion from H323 to
SIP and vice-versa. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Baxter
Sent: Wednesday, January 05, 2005 4:53 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SIP and H323

On Wednesday 05 January 2005 16:50, ROY wrote:
> Hello list,
>
> Is it possible to do simultaneous SIP and H323 on Cisco Voice Gateways?
> Would appreciate if you could point me to a good ref doc.

Sure - just set up SIP or H323 dialpeers, and they both "just work".

Note, though, that bridging a SIP and a H323 dialpeer won't work perfectly -
for instance, dtmf relay gets hosed, as does a lot of other useful control
signalling.


-- 
Anthony Baxter     <anthony at interlink.com.au>
It's never too late to have a happy childhood.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip