[cisco-voip] Installing CCM 4.1.2

[Gabriel Akintayo]

Hello All,

Thanks for responding! I do know about the replacement
upgrade to 2.7. My problem is how do i get the actual
file (2.7) do you have it!
Do you have it anywhere other than the CCO?
Thanks a Lot! if you do can you email it to me at 
akgab107 at yahoo.com

Gabriel

--- cisco-voip-request at puck.nether.net wrote:

> Send cisco-voip mailing list submissions to
> 	cisco-voip at puck.nether.net
> 
> To subscribe or unsubscribe via the World Wide Web,
> visit
> 	https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body
> 'help' to
> 	cisco-voip-request at puck.nether.net
> 
> You can reach the person managing the list at
> 	cisco-voip-owner at puck.nether.net
> 
> When replying, please edit your Subject line so it
> is more specific
> than "Re: Contents of cisco-voip digest..."
> 
> 
> Today's Topics:
> 
>    1. RE: Unity 4.05 upgrade (Oliver Rebollido)
>    2. ipcc express (Ahmad Cheikh Moussa)
>    3. Need help installing CCM 4.1.2 (Gabriel
> Akintayo)
>    4. Re: Need help installing CCM 4.1.2 (Lelio
> Fulgenzi)
> 
> 
>
----------------------------------------------------------------------
> 
> Message: 1
> Date: Sun, 3 Jul 2005 22:19:09 -0700
> From: "Oliver Rebollido" <ORebollido at fenwick.com>
> Subject: RE: [cisco-voip] Unity 4.05 upgrade
> To: "Ortiz, Carlos" <CORTIZ at broward.org>,
> <cisco-voip at puck.nether.net>
> Message-ID:
> 
>
<965C0255FD5828438E34F9A68ECA76E70DF0FD at svcexch02.firm.fenwick.llp>
> Content-Type: text/plain; charset="us-ascii"
> 
> Sorry for the late reply.  Yes, our Exchange
> environment was already at
> 2003 SP1 when we installed Unity 4.0(5).
> 
> ________________________________
> 
> From: Ortiz, Carlos [mailto:CORTIZ at broward.org] 
> Sent: Tuesday, June 28, 2005 10:33 AM
> To: Oliver Rebollido; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Unity 4.05 upgrade
> 
> 
> 
> Was your Exchange Environment already running SP1
> when you installed
> Unity?
> 
>  
> 
> Carlos
> 
>  
> 
> ________________________________
> 
> From: Oliver Rebollido
> [mailto:ORebollido at fenwick.com] 
> Sent: Tuesday, June 28, 2005 1:26 PM
> To: Ortiz, Carlos; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Unity 4.05 upgrade
> 
>  
> 
> I did a clean install to 4.0.5 and have not had any
> problems so far.  My
> setup is exactly what you have listed below except
> I'm on Unity 4.0.5.
> 
>  
> 
> ________________________________
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Ortiz, Carlos
> Sent: Tuesday, June 28, 2005 5:19 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Unity 4.05 upgrade
> 
> Does anyone else have/had this scenario?
> 
>  
> 
> Windows 2003 AD no service packs applied
> 
> Exchange 2003 , SP1
> 
> Unity 4.03 sr1
> 
>  
> 
>  
> 
> When I looked into upgrading to 4.04 a while back
> the release notes
> discussed an issue upgrading to 4.04 if Exchange SP1
> was already
> applied. It would have required us to uninstall
> Exchange 2003 SP1 run
> the permissions wizard on the Unity server and then
> reinstall Exchange
> 2003 SP1.  I talked to TAC about this and this issue
> should be resolved
> with 4.05, but I was wondering if anyone has done it
> yet.
> 
>  
> 
> Thanks
> 
>  
> 
> Carlos
> 
>  
> 
> In accordance with revised Circular 230, any tax
> advice in this
> communication is not intended or written by Fenwick
> & West to be
> used and cannot be used by a taxpayer for the
> purpose of avoiding
> penalties that may be imposed on the taxpayer.
>
----------------------------------------------------------------------
> ATTENTION:
> The information contained in this message may be
> legally privileged
> and confidential. It is intended to be read only by
> the individual
> or entity to whom it is addressed or by their
> designee. If the reader
> of this message is not the intended recipient, you
> are on notice that
> any distribution of this message, in any form, is
> strictly prohibited. 
> 
> If you have received this message in error, please
> immediately notify
> the sender and/or Fenwick & West LLP by telephone at
> (650) 988-8500 
> and delete or destroy any copy of this message.
> 	
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
https://puck.nether.net/pipermail/cisco-voip/attachments/20050704/e98a6ce3/attachment-0001.html
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 04 Jul 2005 15:33:47 +0200
> From: Ahmad Cheikh Moussa <acm at netuse.de>
> Subject: [cisco-voip] ipcc express
> To: cisco-voip at puck.nether.net
> Message-ID: <42C93ABB.9080808 at netuse.de>
> Content-Type: text/plain; charset=ISO-8859-1;
> format=flowed
> 
> Hi!
> 
> I have installed IPCC Express (CRS 3.5(2)) on my
> callmanager 4.1(2)ES32.
> I want to configure it, but I stuck on the first
> configuration of IPCC.
> 
> I could connect and logon with the default
> administrator password.
> After that I configured the ldap configuration.
> I made a new profile and pushed the next button.
> After approximately
> 10 seconds, I could see my "Directory Setup" page.
> Now I could do nothing more. There was no button, to
> go forward
> with the configuration. I tried to go with the
> browser back, but then
> I have to relogin. Since that I can not login again
> and complete
> the installation.
> 
> Any ideas ?
> Is there a way to reenable the Administrator login,
> or can
> I reset the config and start new ?
> 
> Regards,
>   Ahmad
> -- 
> Ahmad Cheikh-Moussa
> NetUSE AG
> Dr.-Hell-Stra?e, 24107 Kiel, Germany
> 
=== message truncated ===