[cisco-voip] Outbound Caller ID

Candace Holman candace_holman at harvard.edu
Tue Jul 12 14:37:40 EDT 2005


That's what I thought too.  The number of the analog line is what's sent, 
and there's no way to rewrite that.

Candace

At 01:27 PM 7/12/2005, Ryan Ratliff wrote:
>Are you using FXS or FXO?  I'm pretty sure with FXO it's impossible to
>send ANI information to the telco.   Not my area of specialty though so
>I may be wrong.
>
>-Ryan
>On Jul 12, 2005, at 12:15 PM, Court Schuett wrote:
>
>Yep.  That's what makes me pretty sure that the problem is with Bell
>South.  That and I always blame the phone company first ;)
>
>Court Schuett
>
>630-909-5560
>cschuett at hprlogistics.com
>
>-----Original Message-----
>From: Wes Sisk [mailto:wsisk at cisco.com]
>Sent: Tuesday, July 12, 2005 11:14 AM
>To: Court Schuett; cisco-voip at puck.nether.net
>Subject: RE: [cisco-voip] Outbound Caller ID
>
>In debug voip ccapi inout are you passing out the correct CLID?
>
>-----Original Message-----
>From: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Court Schuett
>Sent: Tuesday, July 12, 2005 12:11 PM
>To: cisco-voip at puck.nether.net
>Subject: [cisco-voip] Outbound Caller ID
>
>
>Some info:
>
>We have a remote site with a 4 FXO POTS lines.  Calls are coming in and
>out just fine.  No problems there.  Attached to each of those lines is a
>local number.  When a call goes out voice-port 3/0 it goes out with the
>number attached to that line (9508).  When a call goes out voice-port
>3/1 it goes out with the number attached to that line (9506).
>
>At every other of our sites set up like this, the External Number Mask
>overrides the number on the line.  I have tried everything I can think
>of to put the main number (9500) on all the lines to no avail.  I have
>made sure that they are all set to advertise the External Number Mask.
>I have even put the main number on the Calling Party Transform Mask in
>the Route Pattern.  When I do a debug voice ccapi inout on the router,
>it shows the number being advertised is correct (9500).  Nothing has
>worked.
>
>I have called the local provider (Bell South) and they swear that if I
>pass them the number they'll advertise it.  That's where I think the
>problem is though.  It's all I can think of because everything else
>looks correct.  Is there a special trick to passing CID to Bell South or
>am I missing something?
>
>Thanks!
>
>Court Schuett
>
>630-909-5560
>cschuett at hprlogistics.com
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list