[cisco-voip] Dead ata186?

[Jon Lewis]

My ATA186 (configured with SIP software) seems to have quit sometime today
or last night.  I've tried power cycling it, different phones on it, and
moving it to other switch ports.

All it will do is power up, blink the top red LED rapidly, and send out
CDP broadcasts like:

20:59:04.567258 snap CiscoCDP CDP v2, ttl=180s
         01/13 DevID 'SEP000000000000'
         03/0a PortID 'Port 1'
         04/08 CAP 0x10
         05/0b Version:
LDR0203
         06/17 Platform: 'Cisco IP Phone 7905'
         0f/08 unknown field type 0f, len 8
         0b/05 Duplex: half
0x0000   aaaa 0300 000c 2000 02b4 26e3 0001 0013        ..........&.....
0x0010   5345 5030 3030 3030 3030 3030 3030 3000        SEP000000000000.
0x0020   0300 0a50 6f72 7420 3100 0400 0800 0000        ...Port.1.......
0x0030   1000 0500 0b4c 4452 3032 3033 0006 0017        .....LDR0203....
0x0040   4369 7363 6f20 4950 2050 686f 6e65 2037        Cisco.IP.Phone.7
0x0050   3930 3500 0f00 0820 0200 0100 0b00 0500        905.............

Anyone know what might have happened to it and if it's correctable?

Actually, the LED seems to blink in a pattern.  It blinks about 17 or 18
times (so fast they're hard to count).  Then one long illumination.  Then
17 or 18 really fast ones again.

I've tried getting into the voice config menu, but can't.  I get no dial
tone, but it is providing battery, so an analog phone plugged into
phone1 can generate DTMF.

----------------------------------------------------------------------
 Jon Lewis                   |  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________