[cisco-voip] How do I share a line in two locations?

[Ryan Ratliff]

Remember that the partition the line is in only controls who can call 
it.  It's the CSS on the line/phone that decides what route patterns, 
etc it uses for outbound calls.

There should be no issue with two devices in different device pools 
having a shared line.

-Ryan
On Jul 14, 2005, at 6:36 PM, Voll, Scott wrote:

I have two sites that are in different calling areas but have users 
that are
based out of both sites.  Remote site has a Single PRI and the central 
site
has 3 PRIs.  They want there extension at each location (shared line
appearance).  Do I put both extensions in the location (partition) that 
the
extension is supposed to be at?  Then all calls from the central site 
will
go out the WAN to the remote site to dial out?  How is the best way to 
work
this?  I already have toll bypass working so it really only comes down 
to
long distance calls.  What is everyone's two cents worth?

Scott

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip