[cisco-voip] Power supplies for 7970

[Simon, Bill]

If the connector/polarity is the same, the higher-rated current (380 mA >
200 mA) won't be a problem and you can use the higher-current supply for any
phone that requires less.  The supply only gives as much current as the
device needs.  (Same doesn't apply for voltage differences, of course.)


-----Original Message-----
From: Candace Holman [mailto:Candace_Holman at harvard.edu] 
Sent: Tuesday, July 19, 2005 12:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Power supplies for 7970

The external power supplies for the 7970 models are not interchangeable with
the other phone models (48V/200mA vs 48V/0.38A).  But the pricing tool seems
to list only one product number for any IP phone cube, CP-PWR-CUBE-2.  Has
anyone found a different product number for the 7970 IP phone power cube?

Thanks,
Candace


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip